Bosch DiBos Скачать руководство пользователя страница 103

Страница: 103 / 158

DiBos/DiBos Micro

Default Configuration | en

103

Bosch Sicherheitssysteme GmbH

Installation Guide

F.01U.033.308 | V7 | 2009.09

Activate the check boxes of elements (cameras, relays) that

should be available to users with this authorization level. For

dome cameras and pan/tilt cameras, a second column with

check boxes is displayed.

The check boxes in front of the elements mean:

In live mode, only those cameras and relays are shown to the

user that have the check box activated.

In live mode, the user can only control those dome cameras

and pan/tilt cameras with activated check boxes.

Note:

Only video hardware that is already configured is offered by

the video system. If new components are created, access to

these by all access-authorized users must be configured

afterwards.

Select the access rights for the authorization level by

activating the check box.

Here, the activated check boxes in front of the elements

mean:

In playback mode, only those cameras are shown to the user

that have the check box activated.

The saved images with additional data (e.g. date, time, ATM

data) can be searched for, viewed, assessed, copied and

printed out.

The saved images from the corresponding camera can be

deleted.

Configuration

Specifies which function in the DiBos configuration can be

carried out by users with this authorization level. Activate the

check box next to the function in question.

Export video

Allows users with this authorization level to export video

images.

Note:

For the three pre-defined authorization levels, the

exportation of video images cannot be deactivated.

DiBos application

Specifies which function in DiBos operation can be carried

out by users with this authorization level. Activate the check

box next to the function in question.

Save

The entries are saved.

Содержание DiBos































































































































































Результаты поиска

Содержание DiBos

Отзывы:

Похожие инструкции для DiBos

Бренды по названию

Популярные бренды

Bosch DiBos, Руководство по установке

Результаты поиска

Содержание DiBos

Отзывы:

Похожие инструкции для DiBos

Бренды по названию

Популярные бренды