62
en | Default Configuration
DiBos/DiBos Micro
F.01U.033.308 | V7 | 2009.09
Installation Guide
Bosch Sicherheitssysteme GmbH
7
Extended...
Click the button. A dialog box opens. Here you can edit the
settings for each camera.
8
Extended settings
The information on pre- and post-alarm time and pre-alarm
recording are valid for the selected time period and for all
cameras on the camera tab.
Note:
If the cameras are assigned differing values, this is
indicated by an asterisk (*).
Pre-alarm time [sec.]:
Select the pre-alarm time for the alarm and motion
recording.
Note:
The maximum pre-alarm time is 1800 seconds. The pre-
alarm time depends on the recording rate of the pre-alarm
recording. A maximum of 3600 images can be recorded for
each pre-alarm and by each camera.
Example:
1 image/
second = 1800 seconds, 2 images/second = 1800 seconds,
4 images/second = 900 seconds, 5 images/second =
720 seconds etc.
Post-alarm time [secs.]:
Enter the post-alarm time.
Note:
The maximum post-alarm time is 999 seconds. The default
setting is 0 seconds.
Pre-alarm recording:
Select the recording rate for the pre-alarm time. The
recording rate applies to alarm recording and motion
recording.
9
Quality levels
Click the button. A dialog box opens. You can add or edit
recording qualities (see also
Section Specify recording
quality for analog cameras
).
10
Assigned grabber power
The system calculates, per camera tab (grabber) and time
period, the sum of the recording rates for continuous and
motion recording. Alarms are not taken into account.
Note:
If the result exceeds the grabber power (more than 100%),
the user cannot save the settings.
11
Default settings
Click the button to see the default settings.
12
Copy settings to other
time periods...
Copies all tabs from the selected time period with all the
settings they contain into other time periods.
Click the button. A dialog box opens where you can select
the time periods.
13
Save
The entries are saved.
