126
en | Connections
DiBos/DiBos Micro
F.01U.033.308 | V7 | 2009.09
Installation Guide
Bosch Sicherheitssysteme GmbH
Mapping IP addresses and computer names:
1.
Open the Notepad program.
2.
Enter the public address (Internet address) of the remote station router and the
computer name of the remote station (DiBos receiver). The address and the computer
name must be separated by at least one space or tab character.
3.
Save the file under the file name Imhosts in the directory
C:\WINDOWS\system32\drivers\
.
4.
Remove the file extension
.txt
in Windows Explorer. The file must not have an
extension.
5.
Reboot the computer.
In the router configuration:
1.
Use the standard configuration of the network provider.
2.
Activate the router's firewall.
3.
Activate port forwarding and forward the UDP port configured in DiBos (e.g. 1750) to the
DiBos recorder IP address (e.g. 192.168.1.10). To do this, use the manufacturer's router
documentation.
For the DiBos Receiver
In the configuration of the DiBos receiver:
1.
Select the
Remote stations
menu.
2.
Click
New
and enter the name of the remote station (DiBos recorder).
3.
Enter the public address (Internet address) of the remote station router (DiBos
recorder), e.g. 193.251.9.31.
4.
Select
Low bandwidth (live mode)
as necessary.
5.
Click
OK
.
6.
Select the
Security and network
menu in the configuration.
7.
Select
Activate UDP tunneling
.
8.
Enter the port number that you have already used in the DiBos recorder (e.g. 1750) under
Port number
.
Note:
Check that the port is unused using the
netstat -a
command.
9.
Click
OK
.
Mapping IP addresses and computer names:
1.
Open the Notepad program.
2.
Enter the public address (Internet address) of the remote station router and the
computer name of the remote station (DiBos recorder). The address and the computer
name must be separated by at least one space or tab character.
NOTICE!
The DSL router and DiBos recorder must be located in the same network.
