DiBos/DiBos Micro
Default Configuration | en
83
Bosch Sicherheitssysteme GmbH
Installation Guide
F.01U.033.308 | V7 | 2009.09
Assigning AP line statuses to inputs (not for Bosch G Series)
Inputs and outputs
menu >
AP inputs
tab >
Line status
section >
Assign
button
(see also
Section 6.5.7 Configuring AP Inputs
)
Assign AP line statuses to the inputs.
Adding line statuses
Removing line statuses
5
Line status - Assign
Click the button. A dialog box opens, allowing you to
view and edit the default assignment of the line
statuses (see also
Section Assigning AP line statuses
to inputs (not for Bosch G Series)
).
Note:
Only possible for LSN alarm panels.
6
Addresses - Assign
Click the button. A dialog box opens, allowing you to
assign specific AP addresses to the input (see also
Section Assigning AP addresses to inputs (not for
Bosch G Series)
and
Section Assigning AP addresses
(Bosch G Series) to inputs
).
7
Save
The entries are saved.
1
Unselected line
statuses:
Select the line status.
2
Add
Click the button. The line status is added to the
Selected line
statuses:
list field.
5
Close
Finishes the procedure. Saves the entries.
3
Selected line statuses: Select the line status.
4
Remove
Click the button. The line status is removed from the
Selected line statuses:
list field.
5
Close
Finishes the procedure. Saves the entries.
