34
en | Quick Configuration
DiBos/DiBos Micro
F.01U.033.308 | V7 | 2009.09
Installation Guide
Bosch Sicherheitssysteme GmbH
5.3
Setting up the Network
System
menu >
Configuration wizard
>
Next
If integrated into a customer network, the following settings must be made:
1
Network card:
Select the network card.
Limit bandwidth
Limits data transmission bandwidth to a value that the
system does not exceed.
2
TCP/IP settings
Specify here whether the network connection should use a
fixed IP address or whether the IP address should be
assigned automatically.
Obtain IP address
automatically
The IP address of this network connection is dynamically
assigned by a DHCP server.
Note:
The device must be connected to the network and the
available network must support this function.
3
Use following IP
address:
A fixed IP address will be assigned to the network
connection. In this case, the IP address and subnet mask
must subsequently be entered.
Note:
You can obtain these from your system administrator or
Internet service provider.
IP address:
Enter the IP address.
Subnet mask:
Enter the number of the subnet mask. The IP address and
subnet mask determine which network your computer will
use.
