Bosch DiBos Скачать руководство пользователя страница 30

Страница: 30 / 158

en | Quick Installation

DiBos/DiBos Micro

F.01U.033.308 | V7 | 2009.09

Installation Guide

Bosch Sicherheitssysteme GmbH

Quick Installation

This chapter describes how to put the device into operation quickly and easily.

Main connections

Connect the cameras to the video inputs.

Make sure that the HW dongle is connected to the parallel interface (if you are handling a

device that has been supplied with a HW dongle).

Connect the VGA monitor.

Connect the mouse and keyboard.

Optional connections

The optional connections can be added after the system is configured.

Connect monitor A and monitor B to connections A and B.

Connect up to 32 alarm inputs (for DiBos micro: 12).

Connect up to 16 relay outputs (for DiBos micro: 12).

Connect your network via the Ethernet port.

Connect customer-operated ATMs, foyer card reader, radio clock and alarm panel.

Switching on

Switch on all connected devices.

Plug the power cable into the video system.

Switch on the video system (On/Off switch on the front). The computer boots up.

First-time use

Once the boot routine is complete, 1 image/second is stored for every camera connected.

The user interface is automatically displayed. This shows images from all connected cameras

in a multi-image view. If no images are displayed for a camera, check the camera connection.

You are not yet logged on as a user. You can, however, start the Configuration wizard.

Quick configuration with the help of the Configuration wizard

Start the Configuration wizard in the

System

menu >

Configuration wizard

Carry out a quick configuration in the Configuration wizard or load an existing

configuration onto the system.

Содержание DiBos































































































































































Результаты поиска

Содержание DiBos

Отзывы:

Похожие инструкции для DiBos

Бренды по названию

Популярные бренды

Bosch DiBos, Руководство по установке

Результаты поиска

Содержание DiBos

Отзывы:

Похожие инструкции для DiBos

Бренды по названию

Популярные бренды