Reference Timing
These settings allow you to manually adjust the reference timing on a line or pixel basis. Simply
tap the arrow icons on either side of the “lines” and “pixels” settings to make adjustments.
Setup Settings Page 3
The third page of your URSA Broadcast's 'setup' tab contains the following settings
Set Function Button
On the outside of your URSA Broadcast's LCD touchscreen, you’ll notice two function buttons,
‘F1’ and ‘F2.’ These are mappable to frequently used features and are quickly accessible
when using your camera with the LCD touchscreen closed, such as when you are using
URSA Viewfinder.
Your URSA Broadcast's F1 and F2 buttons are
located on the forward control panel
NOTE
When you are setting your reference source for URSA Broadcast, you may
experience a small dropout on your camera’s outputs when switching between your
reference sources. This is because the camera is adjusting its referencing timing to
match that of the external source. For this reason it is important not to change this
setting during a production and only while setting up.
ON
OFF
88
Settings
