BLACKBERRY RADAR R2 ITE100-1 INSTALLATION GUIDE
DRY VAN, INSULATED TRAILERS (BARN DOORS)—CARGO PERCENTAGE
5
3 Installing BlackBerry Radar R2 modules
You may have a large number of BlackBerry Radar R2 modules to install. Follow the instructions
in this section to:
•
Match each module identifier to its asset identifier
•
Install the module to the asset you wish to track
.
3.1 Prepare to install
To complete the installation of the module to your assets, you will need the following
components. The following components are contained in the module packaging.
Radar R2 Module Package Contents
Radar R2 Module
Drill Template
(Upper-mount installs
only)
Lithium Metal
Battery
Fastener Bag
(4 screws / device)
Radar R2 20° Side-Mount Tilt B Visor Accessory Kit Package Contents
NOTE: The Radar R2 20° Side Mount Tilt Bracket Accessory Kit is
required
for side-mount
barn door installations. The Visor Accessory is
required
for side-mount installations at 90”
(229 cm). These accessories are available from your BlackBerry Representative.
Side Mount
Drill Template
Radar R2 20° Tilt Brackets
and Fasteners
(
Required
for side-mount installations
2 brackets and 4 fasteners per device)
Radar R2 Visor Accessory
and Fastener
(
Required
for side-mount installations
at 90” (229 cm). 1 visor and fastener
per device)
If you are missing any of the above components in your package, contact your BlackBerry Sales
Representative.
