BLACKBERRY RADAR R2 ITE100-1 INSTALLATION GUIDE
DRY VAN, INSULATED TRAILERS (BARN DOORS)—CARGO PERCENTAGE
51
5.
Place the module on the wall, aligning the holes on the 20° bracket with the holes you
drilled into the wall.
6.
Insert your fastener of choice into the holes and fasten the module to the wall using one
of the approaches below.
Wood Screws
•
Having drilled a pilot hole slightly smaller than your fastener, use a screwdriver or drill
and driver bit and nut driver to drive the screw to the wall.
Well Nuts
•
Insert the Well Nuts into the holes. Align the holes on the 20° bracket to the well nuts,
then insert the fasteners. Secure the module to the asset.
•
Do not tighten fastener beyond 35 in-lb. (4 N-m) to avoid damaging the well nut.
Well
Nut
35 in-lb.
4 N-m
Torque
Limit
