BLACKBERRY RADAR R2 ITE100-1 INSTALLATION GUIDE
DRY VAN, INSULATED TRAILERS (BARN DOORS)—CARGO PERCENTAGE
59
Preparing battery for shipment
If you do need to ship the battery, along with the module, please follow this procedure.
1.
Remove the four screws from the battery door. Insert a tool at the arrows and lift upward
to remove the battery door. Retain the screws as they will be required to re-secure the
battery door to the rear housing.
2.
Ensure the battery cable is disconnected from the battery connector. Lift the battery and
tuck the connector under the battery. Return the battery to the battery nest.
3. Place the battery cover onto the module and install the screws. Module is now ready to be
placed in the UN certified Dangerous Goods packaging.
Connector
Placement
IMPORTANT:
Never ship the module with the battery cable connected. Battery
must be shipped inside the module with battery cable disconnected and the
battery connector placed under the battery.
Disconnect
Battery Cable
