BLACKBERRY RADAR R2 ITE100-1 INSTALLATION GUIDE
DRY VAN, INSULATED TRAILERS (BARN DOORS)—CARGO PERCENTAGE
16
3.4.2 Installing the module on an asset
1.
As indicated in Section 3.3 of this guide, record the module identifier and the asset
identifier the module will be paired with. For your convenience, you may quickly create a
record of the module and asset pairings by removing the partially attached label from the
front of the module and placing it on the installation worksheet, next to the asset that will
be tracked by the module.
Tip:
For modules that have previously been transferred to new assets, the temporary S/N
label may no longer be in place. If this is the case, you will need to write the module
identifier (S/N) for each module on the installation worksheet.
The following sections of this guide will illustrate recommended installation methods for
various asset scenarios.
