BLACKBERRY RADAR R2 ITE100-1 INSTALLATION GUIDE
DRY VAN, INSULATED TRAILERS (BARN DOORS)—CARGO PERCENTAGE
58
Battery replacement
1.
Place the battery into the battery compartment.
2.
Connect the battery cable to the battery connector. The LED will blink to indicate the
module is active.
NOTE:
It can take up to 5 seconds for the blink sequence to begin. Please
be patient. Once you see the LED blink, continue to the next step.
3.
Fully install the battery door. Locate the four battery door screws. Using a Phillips PH2
screwdriver, install the screws to secure the battery door.
IMPORTANT:
Screw torque
must be 7-8 in-lb. (0.8-0.9 N-m).
LED
Battery Connector
7-8 in-lb.
0.8-0.9 N-m
Screw
Torque
