BLACKBERRY RADAR R2 ITE100-1 INSTALLATION GUIDE
DRY VAN, INSULATED TRAILERS (BARN DOORS)—CARGO PERCENTAGE
14
8.
Place the brackets on the rear of the Radar R2 module, ensuring the holes on the R2 20°
Tilt Bracket Accessory are aligned with the holes on the Radar R2 module and visor and
the bracket’s guide tabs are seated within the rear openings of the module.
9.
Secure the brackets and visor to the module with the supplied fasteners.
IMPORTANT:
The longer “visor” screw (FAS-63756-001) must be used on the end of the
module where the visor is installed. The shorter “bracket” screw will be used on the
opposite end. One extra screw (from the 20° Bracket) will remain, post-installation.
Bracket
Screw
35 in-lb.
4 N-m
Torque
Limit
Visor
Visor
Screw
