Black Box PI750A, Руководство пользователя

Страница: 29 / 173

21
CHAPTER 4: Configuration
4.7 Choosing and Changing Port Parameters
Using the port-configuration screens on the previous pages, you can
configure any of the Multiport Spooler VIII’s ports, including the default
output ports (numbers 4, 8, and 12), to meet your needs. After selecting a
particular port, just select the parameter and change the value to the one
you prefer.
Not every parameter applies to every port. For example, serial
communication parameters (data bits, parity, etc.) apply only to serial ports.
When a parameter does not apply to a port, dashes (- - - - - ) appear in its field.
To position the highlight bar on the parameter you wish to modify, use the
up (
↑
), down (
↓
), left (
←
), and right (
→
) arrow keys, or type the first letter of
the parameter. If several parameters start with the same letter, press the letter
key until the highlight bar reaches the desired parameter. To select that
parameter, press Enter. The cursor positions itself in the value column to the
right of the parameter’s name. If the value is erased and the field is in reverse
video, type the new value and press Enter. If the value flashes, use the up and
down arrow keys to toggle between the available choices. In either case, press
Enter to confirm your entry.
The various port configuration parameters and a summary of each one’s
purpose is listed on the following page. A detailed explanation of each
parameter follows.