Black Box PI750A, Руководство пользователя

Страница: 168 / 173

160
MULTIPORT SPOOLER VIII (4-, 8-, and 12-Port Models)
G.2.4 H
ELP
: U
NDERSTANDING
MPSWIN95
MPSWIN95’s Help is a standard Windows Help file; select the green
underlined topics or cross-references and read the displayed information,
just as you would with the Help file of any other Windows 95 application.
G.2.5 UCTP: S
ENDING
C
OMMANDS
MPSWIN95’s User Command Transmission Program is much like that of the
MPSWIN (Windows 3.x) version. However, the Windows 95 UCTP.PRO file,
which contains the default UCTP command list, is slightly different from the
DOS and Windows 3.x versions of UCTP.PRO; the commands in the Windows
95 version of the file are listed below. Bear in mind that you can always add
commands to the UCTP by using the Editor program (see
Appendix E ).
For some of these commands the Parameter window is displayed after you
press Enter. Type in the specifics of your request at this window.
For more information about some of these commands, refer to
Section 7.3.2 of your manual, which describes the commands found in the
DOS and Windows 3.x versions, as well as Chapter 4 , which explains the
commands in the context of default settings for each port. Appendix D lists
these commands in exact DOS direct-command format and provides
additional information about them.
Commands marked with a single asterisk (“ * ”) appear only in the Advanced
menu. Those marked with a double asterisk (“ ** ”) appear only in the Default
menu.
Broadcast* (24-port version only)
Same as the DOS and Windows 3.x command (see Section 7.3.2 ).
Peripheral Connection* (4-, 8-, or 12-port version) or Select an Output
Port* (24-port version)
Same as the DOS and Windows 3.x Select an Output Port command (see
Section 7.3.2 ).
Use First Printer** , Use Second Printer** , Use Third Printer** , and
Use Fourth Printer**
Same as the DOS and Windows 3.x commands (see Section 7.3.2 ).
*Appears only in the Advanced menu.
**Appears only in the Default menu.