manualshive.com logo in svg

Biotek EL800, Руководство оператора

Поделиться
Скачать
Biotek EL800 Скачать руководство пользователя страница 45

Setting Up the ELx800

  

|  

19

 

 

ELx800 Operator’s Manual 

Configuring Global Default Options 

The ELx800™ contains several global configurable options, such as date and time, report 
output, and plate reading preferences. These options are accessed via the Select Utility 
Option menu (

Figure 5

 below), and include: 

• 

SETUP:

  Set the current date and time, as well as the date and time formats. 

• 

OUTPUT:

  

Specify where plate data should be sent, to a printer, a computer, or to 

both. Additional options include report format (Column and/or Matrix), and 
whether or not to print standard curves. 

• 

READ:

  

Enable or disable read-time prompting for Plate ID, Sample ID, and Sample 

Count. Specify whether or not to read in Rapid mode. 

 

 

 

Note:

 Refer to 

Using the Utility Options

 in 

Chapter 3

 for more 

specific information on setting up the ELx800. 

READY  09:14AM  09/08/04
READ  DEFINE REPORT UTIL

REPORT OUTPUT:  PRINT
PRINT   COMPUTER  BOTH 

SELECT UTILITY OPTION:
TESTS SETUP OUTPUT READ

PROMPT FOR PLATE ID? YES
 YES    NO 

EDIT SETUP INFORMATION:

DATE  TIME FILTER *MORE   

 

 

Figure 5: Global configuration options available under UTIL 

Содержание EL800



























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды