manualshive.com logo in svg

Biotek EL800, Руководство оператора

Поделиться
Скачать
Biotek EL800 Скачать руководство пользователя страница 111

Define (Method, Map, Formula and Curve)

  

|  

85

 

 

ELx800 Operator’s Manual 

 

S  T  A  R  T      M  A P P I N G                            

A  T      W  E  L  L    L O C A T I O N :         A  0  1 

• 

Use the 

alpha

 

and

 

numeric

 keys to choose the well location to begin 

the assay. 

• 

Repeat this process for each assay within the panel. Remain aware of 
the total number of controls, standards, and blanks that were originally 
mapped in each assay while mapping for the panel assay.  

• 

For example, to include Assays 1, 8, and 22 in the Panel assay (

DOWN

 

mapping is selected for the Panel): 

 

Assay 1 has a total of 12 wells defined for controls, blanks, and 

standards. In the Panel, the mapping for Assay 1 begins in well A01. 
The user wants to run 6 samples in Assay 1. Assay 1 now fills wells 
A01 through B03. 

 

The mapping for Assay 8 can begin in well B04, or any well other 

than A01 to B03. The reader will “chirp” if you try to map into a 
well that is already assigned for use with the Panel.  

 

The mapping for Assay 22 may begin at the next available well 

location after Assay 8 mapping is complete.   

 

The Panel Assay results are sorted by sample (unless a custom 

assay has been programmed by BioTek).  

 

Note:

 The interpretation of Results reports for each assay in the Panel 

will print first, and then the Sample results will print.    

 

Содержание EL800



























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды