manualshive.com logo in svg

Biotek EL800, Руководство оператора

Поделиться
Скачать
Biotek EL800 Скачать руководство пользователя страница 19

Revision History (Continued)  

|  

xv

 

ELx800 Operator's Manual

Revision History (Continued) 

 

P 10/06 

Ch 3 Operation, 

clarified instructions for running Panel assays via the 

keypad. 

Ch 4 Instrument Qualification

, replaced incorrect sample System Test 

report with a report run using an ELx800. 

Ch 5 Maintenance and Decontamination

, added tips for storing and 

handling filters. 

Appx B, Using 384-Well Geometry

, inserted step 13 to select a Read 

Type when using Gen5. 

 

Intended Use Statement 

The intended use of this instrument is dependent on the instrument’s rear panel label.  
If there is an IVD label, then the instrument may be used for clinical, research and 
development, or other nonclinical purposes. If there is no such label, then the instrument 
may 

only

 be used for research and development, or for other nonclinical purposes. 

Quality Control   

It is considered good laboratory practice to run laboratory samples according to 
instructions and specific recommendations included in the assay package insert for the 
test to be conducted. Failure to conduct Quality Control checks could result in erroneous 
test data. 

Repackaging and Shipping 

 

If you need to ship the instrument to BioTek for service or 
repair, contact BioTek for a 

Return Materials 

Authorization

 (

RMA

)

 number, and be sure to use the 

original packaging. Other forms of commercially available 
packaging are not recommended and can void the 
warranty. If the original packaging materials have been 
damaged or lost, contact BioTek for replacement 
packaging.

 

Содержание EL800



























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды