INSTALLATION MANUAL
Radio channel control con
fi
guration
CH logic= 0 - Control con
fi
gured as Start E. Operation according to
STEP-BY-STEP MOV
. logic. External start for tra
ffi
c light control.
CH logic= 1 - Control con
fi
gured as Start I. Operation according to
STEP-BY-STEP MOV
. logic. Internal start for tra
ffi
c light control.
CH logic= 2 - Control con
fi
gured as Open.
The command causes the leaves to open.
CH logic= 3 - Control con
fi
gured as Closed.
The command causes the leaves to close.
CH logic= 4 - Control con
fi
gured as Ped.
The command causes the leaf to open to the pedestrian (partial) opening position. Operation according to
STEP-BY-STEP
. logic
Logica CH= 5- Control con
fi
gured as STOP.
The command performs a STOP
CH logic= 6 - Control con
fi
gured as AUX0. (**)
The control activates the AUX0 output
CH logic= 7 -
Not used
CH logic= 8 -
Not used
CH logic= 9 - Control con
fi
gured as AUX3. (**)
The control activates the AUX3 output
CH logic= 10 - Control con
fi
gured as EXPO1. (**)
The control activates the EXPO1 output
CH logic= 11 - Control con
fi
gured as EXPO2. (**)
The control activates the EXPO2 output
(**) Active only if the output is con
fi
gured as Monostable Radio Channel, Courtesy Light, Zone Light, Stair Light, Bistable Radio Channel or Timed Radio Channel.
TABLE “C”
–
RADIO MENU
(
RADIO
)
Logic
Description
add 1ch
Add 1ch Key
associates the desired key with the 1nd radio channel command.
add 2ch
Add 2ch Key
associates the desired key with the 2nd radio channel command.
add 3ch
Add 3ch Key
associates the desired key with the 3nd radio channel command.
add 4ch
Add 4ch Key
associates the desired key with the 4nd radio channel command.
erase 64
Erase List
WARNING!
Erases all memorized transmitters from the receiver’s memory.
erase 1
Eliminates individual radio control
Removes a radio control (if clone or replay is disabled) To select the radio control to be deleted, enter the position or press a button on the radio
control to be deleted (the position is displayed)
Read receiver code
Displays receiver code required for cloning transmitters.
LEO B CBB DL2 3 230 L02-LEO B CBB DL2 3 120 F02-
LEO B CBB DL2 3 120 F02 PHOT USA16
-
41
D812916 00100_02
ENGLISH
