BFT LEO B CBB DL2 3 120 F02 PHOT USA16, Руководство по установке

Страница: 40 / 80

INSTALLATION MANUAL
Logic
De fi nition Default
Cross out
setting
used
Optional extras
ADDRESS
Address 0
[ ___ ]
Identi fi es board address from 0 to 119 in a local BFT network connection.
(see U-LINK OPTIONAL MODULES section)
EXPI1
Con fi guration of
EXPI1 input on
input-output ex-
pansion board.
1-2
1
0 Input con fi gured as Start E command.
1 Input con fi gured as Start I command.
2 Input con fi gured as Open command.
3 Input con fi gured as Close command.
4 Input con fi gured as Ped command.
5 Input con fi gured as Timer command.
6 Input con fi gured as Timer Pedestrian command.
7 Input con fi gured as Phot (photocell) safety.
8 Input con fi gured as Phot op safety (photocell active during opening only).
9 Input con fi gured as Phot cl safety (photocell active during closing only).
10 Input con fi gured as Bar safety (safety edge).
11
Input con fi gured as safety Bar OP, safety edge with inversion active only while opening, if while closing the
movement stops.
12
Input con fi gured as safety Bar CL, safety edge with inversion active only while closing, if while opening the
movement stops.
13
Input con fi gured as Phot test safety, tested photocell. Input 3 (EXPI2) on input/output expansion board is switched
automatically to safety device test input, EXPFAULT1.
14
Input con fi gured as Phot op test safety, tested photocell active only while opening. Input 3 (EXPI2) on input/
output expansion board is switched automatically to safety device test input, EXPFAULT1
15
Input con fi gured as Phot cl test safety, tested photocell active only while closing. Input 3 (EXPI2) on input/output
expansion board is switched automatically to safety device test input, EXPFAULT1
16
Input con fi gured as Bar safety, tested safety edge. Input 3 (EXPI2) on input/output expansion board is switched
automatically to safety device test input, EXPFAULT1.
17
Input con fi gured as safety Bar OP test, safety edge with inversion active only while opening, if while closing the
movement stops. Input 3 (EXPI2) on input/output expansion board is switched automatically to safety device
test input, EXPFAULT1.
18
Input con fi gured as safety Bar CL test, safety edge with inversion active only while closing, if while opening the
movement stops. Input 3 (EXPI2) on input/output expansion board is switched automatically to safety device
test input, EXPFAULT1.
EXPI2
Con fi guration of
EXPI2 input
on input-output
expansion board.
1-3
0
0 Input con fi gured as Start E command.
1 Input con fi gured as Start I command.
2 Input con fi gured as Open command.
3 Input con fi gured as Close command.
4 Input con fi gured as Ped command.
5 Input con fi gured as Timer command.
6 Input con fi gured as Timer Pedestrian command.
7 Input con fi gured as Phot (photocell) safety.
8 Input con fi gured as Phot op safety (photocell active during opening only).
9 Input con fi gured as Phot cl safety (photocell active during closing only).
10 Input con fi gured as Bar safety (safety edge).
11
Input con fi gured as safety Bar OP, safety edge with inversion active only while opening, if while closing the
movement stops.
12
Input con fi gured as safety Bar CL, safety edge with inversion active only while closing, if while opening the
movement stops.
EXPO1
Con fi guration of
EXPO2 output
on input-output
expansion board
4-5
11
0 Output con fi gured as monostable Radio Channel.
1 Output con fi gured as SCA (gate open light).
2 Output con fi gured as Courtesy Light command.
3 Output con fi gured as Zone Light command.
4 Output con fi gured as Stair Light.
5 Output con fi gured as Alarm.
EXPO2
Con fi guration of
EXPO2 output
on input-output
expansion board
6-7
11
6 Output con fi gured as Flashing light.
7 Output con fi gured as Latch.
8 Output con fi gured as Magnetic lock.
9 Output con fi gured as Maintenance.
10 Output con fi gured as Flashing Light and Maintenance.
11 Output con fi gured as Tra ffi c Light control with TLB board.
12 Output con fi gured as Antitampering
13 Output con fi gured as Gate Status
14 Output con fi gured as Bistable Radio Channel
15
Output con fi gured as timed Radio Channel
TRAFFIC LIGHT
PREFLASHING
Tra ffi c light
pre- fl ashing
0
0 Pre- fl ashing switched o ff .
1 Red lights fl ash, for 3 seconds, at start of operation.
TRAFFIC LIGHT
RED LAMP
ALWAYS ON
Steadily lit red
light
0
0 Red lights o ff when gate closed.
1 Red lights on when gate closed.
40 -
LEO B CBB DL2 3 230 L02-LEO B CBB DL2 3 120 F02- LEO B CBB DL2 3 120 F02 PHOT USA16
D812916 00100_02