BERTHOLD TECHNOLOGIES NightOWL II LB 983, Руководство по эксплуатации

Страница: 77 / 136

LB 983 NightOWL II Operating Manual System Description
73
5.3 Acquisition Chamber
5.3.1 Light-tight Door with Door Button
To close the acquisition chamber light-tight, the door frame is provided with an elastic sealing
and a handle which, when turned by 180°, will pull the door into the frame and squeeze it
against the sealing. An inductive sensor indicates if the door is closed correctly.
Always make sure that the door is properly closed. If the door is not closed and you try to take
an image, you will be alerted by the program.
Images can be taken even while the door is open.
The camera is insensitive to daylight, i.e. the
camera will not be destroyed by overexposure.
5.3.2 Illumination of the Acquisition Chamber (Dark Box)
Four LED's installed on the walls of the dark box ensure constant illumination of the acquisition
chamber. However, the illumination is dependent on the camera setting and with very low cam-
era position it can be affected adversely. If necessary, an additional light source has to be in-
stalled (power is supplied via the outlet strip in the acquisition chamber).
The illumination of the acquisition chamber is automatically controlled by the software.
5.3.3 Connector Field
The connector field is located in the right rear corner of the acquisition chamber; it includes the
following ports:
Center sockets: System connectors to control instrument
options (e.g. heating table)
Lower mains socket: Mains socket enabled via software
Upper mains socket: Mains socket enabled when device is
turned on
Round socket: Light-tight, insulated cable conduit to the
rear panel