BERTHOLD TECHNOLOGIES NightOWL II LB 983, Руководство по эксплуатации, Страница: 7 / 136

LB 983 NightOWL II Operating Manual Safety Instructions
3
2 Safety Instructions
Caution! This sign alerts you to important operating procedures with a po-
tential danger of damaging the equipment and endangering your safety on
disobeying. Refer to the user and instrument manuals for precautionary in-
structions.
This operating manual includes information and warnings that have to be ob-
served by the user in order to ensure safe operation of the instruments.
Please do always act according to the following safety instructions, be-
fore as well as during operation of the system! Before set up and oper-
ation of the instrument it is necessary to read the instructions below as
neither safe operation of the instrument nor safety of the user are
guaranteed otherwise. Failure to follow the instructions may invalidate
the warranty.
The instrument has been manufactured in accordance with the safety re-
quirements for electronic and medical measuring systems. If the law lays
down regulations on the installation and/or operation of sample measuring
system, then it is the operator’s responsibility to adhere to them.
The manufacturer has done everything possible to guarantee that the
equipment functions safely, both electrically and mechanically. The user has
to make sure that the instrument will be set up and installed properly to
guarantee safe operation.
The instruments are tested by the manufacturer and supplied in a condition
that allows safe and reliable operation.

This equipment must be installed and used in accordance with the manufac-
turer´s recommendations. Installation must be performed by properly trained
and authorized personnel.

The installation category is II.

Laser light! Do not stare into the beam.

The instrument may only be operated by personnel who have been trained
on the use of the system. It is strongly recommended that all users read this
manual prior to use.

Never put parts of your body or other devices into the instrument while
the unit is in operation.

Remove the transportation lock before switching on the instrument.

Use the instrument only for the designated application.

The instrument is designed for indoor use only.

The instrument may not be operated at altitudes above 2000 m above sea
level.

The instrument is designed to be operated within a temperature range of 15
to 30 °C.

The instrument is designed to be operated at a maximum relative humidity of
80 % for temperatures up to 31 °C decreasing linearly to 50 % relative hu-
midity up to 40 °C.