BERTHOLD TECHNOLOGIES NightOWL II LB 983, Руководство по эксплуатации

Страница: 50 / 136

LB 983 NightOWL II Operating Manual Quick Start
46
A prefix, the current year and month, the 3 digit sample ID counter as well as a suffix can be
specified if required. The resulting sample ID name can be seen under “Result”. The box “Num-
ber of Identities to Create” defines the amount of sample identities which will be created. More
ID´s can be added to the project later, if necessary.
To go to the next page select
.
On this page you can select the “Acquisition Settings” used for the project.
You can define a “Pre Measurement” and a “Post Measurement” template to be executed be-
fore and after the measurement. Under “Measurement” you select the application template used
to run the measurement.
To go to the next page select
.
The display ranges for the b/w photographic and colored signal (data) image can be defined on
this page. If “Use Default Setting” is selected the system will calculate default values based on
the photograph and the measured data. Individual settings for the minimum and maximum val-
ues can be selected in the “Use Custom Settings” mode.
To go to the next page select
.