BENSHAW RediStart MX2 SEP, Руководство пользователя

Страница: 44 / 130

RediStart MX
2
- SEP Synchronous Controller User Manual
44
4.11 Description of the Keys on the Remote LCD Keypad
The [UP] arrow, [DOWN] arrow, [ENTER] and [MENU] keys on the LCD keypad perform the same functions as
the [UP], [DOWN], [ENTER] and [PARAM] keys on the standard keypad. Three keys have been added, with
one key serving a dual function:
Table 11: LCD Keypad Key Functions
Key Function
• The [START] key triggers has no assigned function with a synchronous controller.
• Increases the value of a numeric parameter.
• Advances to the next value of an enumerated parameter.
• Scrolls forward through a list of parameters within a group (when the last parameter is displayed, it scrolls to
the beginning of the list).
• When a list of faults is displayed, it moves from one fault to the next.
• When the controller is in the Operate Mode, pressing [UP] allows you to change which group of meter values is
monitored.
• Decreases the value of a numeric parameter.
• Reverts to the previous value of an enumerated parameter.
• Scrolls backward through a list of parameters within a group (when the first parameter is displayed, it scrolls to
the end of the list).
• When a list of faults is displayed, it moves from one fault to the previous fault.
• When the controller is in the Operate Mode, pressing [DOWN] allows you to change which group of meter val-
ues is monitored.
• When editing a numeric parameter, the [LEFT] arrow key moves the cursor one digit to the left. If cursor is
already at the most significant digit, it returns to the least significant digit on the right.
• When in Menu mode, the [LEFT] arrow allows groups to be scrolled through in the opposite direction of the
[MENU] Key.
• Stores the change of a value.
• When in Fault History, [ENTER] key scrolls through information logged when a fault occurred.
• When an alarm condition exists, [ENTER] scrolls through all active alarms.
• [MENU] scrolls between the operate screen and the available parameter groups.
• When viewing a parameter, pressing [MENU] jumps to the top of the menu.
• When a parameter is being edited and [MENU] is pressed, the change is aborted and the parameter’s old value
is displayed.
• The [STOP/RESET] key halts the operation of the controller (Stop Key) and causes a fault 68 to occur.
• If a fault has occurred, the [STOP/RESET] key is used to clear the fault (Reset Key).
start
enter
menu
stop
reset