BENSHAW RediStart MX2 SEP, Руководство пользователя

Страница: 3 / 130

Important Reader Notice
Congratulations on the purchase of your new Benshaw MX
2
SEP Controller. This
manual contains the information to install and program the MX2 SEP Controller.
This manual may not cover all of the applications for the MX
2
SEP. Also, it may not
provide information on every possible contingency concerning installation,
programming, operation, or maintenance specific to the MX
2
SEP Controller.
The content of this manual will not modify any prior agreement, commitment or
relationship between the customer and Benshaw. The sales contract contains the
entire obligation of Benshaw. The warranty enclosed within the contract between the
parties is the only warranty that Benshaw will recognize and any statements
contained herein do not create new warranties or modify the existing warranty in any
way.
Any electrical or mechanical modifications to Benshaw products without prior written
consent of Benshaw will void all warranties, and may also void UL listings or other
safety certifications. Unauthorized modifications may result in product damage,
operation malfunctions, or personal injury.
Incorrect handling of the controller may result with an unexpected fault or damage to
the controller. For best results on operating the MX
2
SEP, carefully read this manual,
and all warning labels attached to the controller before installation and operation.
Keep this manual on hand for reference.
Do not attempt to install, operate, maintain or inspect the controller until you have
thoroughly read this manual and related documents carefully and can use the
equipment correctly. Do not use the controller until you have a full knowledge of the
equipment, safety procedures and instructions. This instruction manual classifies
safety instruction levels under “WARNING” or “CAUTION”.
WARNING : Indicates situations in which a high voltage can cause physical
injury, or death.
CAUTION : Indicates situations in which damage to equipment may occur.
NOTE: Marks an important point in the documentation.
Please follow the instructions of both safety levels as they are important to personal
safety and equipment protection.
High Voltage Motor control equipment and electronic controllers are connected to hazardous line
voltages. When servicing starters and electronic controllers, there may be exposed
components with housings or protrusions at or above line potential. Extreme care
should be taken to protect against shock.
Stand on an insulating pad and make it a habit to use only one hand when checking
components. Always work with another person in case an emergency occurs.
Disconnect power before checking controllers or performing maintenance. Be sure
equipment is properly grounded. Wear safety glasses whenever working on
electronic controllers or rotating machinery.
Trademark Notice Benshaw and are registered trademarks of Benshaw Incorporated. UL
is a trademark of Underwriters Laboratories, Incorporated.