Bennett HIGH FLOW H35, Инструкция по эксплуатации

Страница: 82 / 98

Maintenance
Bennett HF H35 Instruction Manual 78
DISPENSER TESTS
ID # Dispenser Components Description Frequency Notes:
F1 Card Reader Test
Verify that it is working properly (if
applicable).
Annually
Refer to the Bennett Pump SSP
Programming, Service, and Parts
Manual
for service information.
F2 Communication Test
Verify dispenser is communicating
with the console.
Annually
F3 Encryption Test
Test the injection used to encrypt the
Debit Card PIN Pad (if applicable).
Annually
F4 Gas Detection Equipment Test and Re-Calibrate
Semi-
Annually
Maintenance, inspection,
calibration, and testing records must
be kept for a minimum of 3 years.
F5 Handle Switch Test
Verify if the correct pump handle is
displayed on the screen and activates
with movement.
Annually
F6 Hydraulics - Fill Line Leak Test - High and Low Pressure Annually
F7 Hydraulics - Vent Line Leak Test Annually
F8
Keyboard, Switch and
Beeper Test
Verify switches for the product
buttons, buttons on the programming
keypad, and beeper are functioning.
Annually
F9 PIN Pad Test
Verify that every key on the module is
functioning.
Annually
F10 PLC Test
Verify dispensers RS485
communication with the PLC is
working.
Annually
F11 Printer Test
Receipt prints legibly and matches
display. Check receipt (pump side,
product, PPM, mass, and total).
Annually
Refer to the SSP manual (132544)
for more information.
F14 Product Select Test
Verify all pads on the product select
board function.
Annually
F15 Purge Test
Verify that the purge system activates
and deactivates and the results of a
timed purge procedure.
Annually
F16 RAM Test Verify if RAM is good or corrupted. Annually
F17 Run a Sale
Check the functionality of the product
displays, product select buttons,
valves, totalizers, and training screens.
Annually
F18 Segment Test
Verify all segments of all digits are
visible on the display.
Annually
F19 SSP Communication Test
View communication performance
between the POS and the Module.
Annually
Refer to the SSP manual (132544)
for more information.