Programming
Bennett HF H35 Instruction Manual
38
HOW TO CHANGE THE 4-
DIGIT MANAGER’S ACCESS CODE
CAUTION: To avoid having to zero the memory on the CPU. Make sure you record the new access code exactly as it
is programmed into the dispenser.
A new access code can be assigned in Menu Code 3.
1.
Press the
3
button and then the
[MODE]
button on the keypad.
2.
Press the default number [
2218
] or the previously stored access code. Four dashes
appear in the mass display.
3.
Press the [
ENTER
]
button. If access is gained, the four dashes disappear. If the
dashes do not move, an error was made entering the access code and repeat steps
2, 3, and 4.
Note: DO NOT PRESS ENTER.
If enter is pressed the new access code
will be set to 0000.
5.
Press the [
Up
-
Arrow
↑
] button
.
The display shows all zeros as seen in
Enter a new four-digit number on the keypad. The number appears in the mass
display. Make sure the number displayed is correct. Record the number chosen as
the access code.
6.
Press the [
ENTER
] button to save the new access code.
7.
Test the new access code.
Figure 4.10
–
Manager’s keypad
TO TEST THE ACCESS CODE, FOLLOW THIS PROCEDURE:
NOTE: If you make a mistake or lose your new passcode, the pump main memory will have to be zeroed to regain
access to totals information and programming menus. Please call your Bennett authorized service technician to zero
the
dispenser’s main menu and return the passcode to 2218
. This is NOT a warranty paid service call.
1.
Put the dispenser in the
OPERATE
mode by unplugging the Manager’s
Keypad from the dispenser.
2.
Re-enter the
ATTENDANT
mode by plugging the keyboard back in the
product select/auxiliary backlight board.
3.
Press [
ENTER
] for Side 1.
4.
Press the
3
button and then the [
MODE
] button on the keypad.
5.
Press the new four-digit access number. Four dashes appear in the mass
display.
6.
Press the [
ENTER]
button. If access is gained, the four dashes disappear,
and the main price display appears.
Note
: If the dashes do not appear, an
error was made. Repeat Steps 1 through 4.
Figure 4.11
–
New access code entry
Sale $
p A s s
Kilograms
0 0 0 0
C O d E
- - 3
Содержание HIGH FLOW H35
