Bennett HIGH FLOW H35, Инструкция по эксплуатации

Страница: 46 / 98

Programming
Bennett HF H35 Instruction Manual 42
OPTION SELECTION
NUMBER OF GRADES
(per side selection may vary depending on dispenser options)
1 = 1 Grade (Default)
2 = 2 Grades
3 = 3 Grades
NUMBER OF HOSES
(per side selection may vary depending on dispenser options)
1 = 1 Hose (Default)
2 = 2 Hoses
NUMBER OF TIERS 1 = Tier (Default)
2 = Tier
NUMBER OF DETECTORS
(Indicates a gas detector is present with Modbus Slave ID of 2 or 3)
0 = None (Default)
1 = Add2 (Default)
2 = Add3
To review or change the settings in Manager’s Mode 7, press the [ENTER] button on the keypad. Each time the [ENTER] button
is pressed the display moves through the dispenser options. Use the numeric keypad to enter a selection.
NOTE: The access code (menu code 3) must be entered into the pump and the ppm display must indicate dashes
before this mode may be entered.
TYPE OF HYDROGEN DISPENSER
DUTY
0 = None
1 = Light Duty (LD)
2 = Heavy Duty (HD)
3 = Transit (trnst)
The duty rating has four possible settings. By default, the duty rating is
disabled when the EEPROM is initialized. The duty rating can be programmed
to LD, HD, or Transit.
Figure 4.16 – Type of hydrogen dispenser
TYPE OF BANK SWITCHING
BANKS
0 = None
1 = ON-FLY (
The fill does not pause during the switching of station
banks).
2 = PAUSE ( The fill pauses during the switching of station banks).
3 = direct
The bank switching configuration has four possible settings, which are none,
on the fly, pause and direct compression.
Figure 4.17 – Sides Configuration
Sale $
d U t y
Kilograms
L d
C O d E
7
Sale $
b A N k s
Kilograms
P A U S E
C O d E 7