Product Introduction
Bennett HF H35 Instruction Manual
11
(6) PRINTER
The Bennett hydrogen dispenser features an optional printer for printing sale receipts.
(7) TOTALIZER
The Bennett hydrogen dispenser features an optional mechanical totalizer for tracking accumulated total sales.
(8) EMERGENCY STOP SWITCH
WARNING: TO PREVENT ELECTRICAL SHOCK, DISCONNECT FROM POWER SOURCE BEFORE INSTALLATION OR SERVICE.
The emergency stop button (E-STOP) is used as an emergency shutdown device to terminate power and stop the flow of fuel to the
dispenser. A second E-Stop button is optional for Side 2 of the Hydrogen Dispenser.
When the E-STOP button is pushed from the OUT position to the IN position the electrical contacts disengage, and the dispenser stops
fueling and returns to a safe state. When the E-STOP button is pulled from the IN position to the OUT position, the electrical contacts are
restored. The nozzle lever must be actuated on and off to clear the emergency stop and get the dispenser back into run mode.
Figure 1.7
–
Emergency stop switch, label, & positions
(9) DOOR KEY LOCKS
The Key Locks for the electronic door are located on the left side of the door. The Key Locks for the lower door of the dispenser are located
on the top side of the door.
1.
To lock the electronic door, insert the key in one of the locks and turn clockwise until it stops.
2.
Repeat this step for the lower lock on the electronic door.
3.
To lock the lower door, turn the key clockwise until it stops in one of the locks.
4.
Repeat this step for the other lock.
5.
To unlock either door, turn the key counterclockwise until it stops.
MANAGER’S KEYPAD
(LOCATED INSIDE ELECTRICAL CABINET)
The Manager’s Keypad allows the
customer or operator the ability to access dispenser totals, pricing
information, diagnostic information, and programming. This keypad is shipped with each dispenser,
located in the electronics head, and is normally disconnected from the system during normal use.
Refer to the operation section for a complete description of the keypad functions for programming
the dispenser and the service.
Figure 1.8
–
Manager’s Keypad
Содержание HIGH FLOW H35
