Bennett HIGH FLOW H35, Инструкция по эксплуатации

Страница: 64 / 98

Programming
Bennett HF H35 Instruction Manual 60
•
0 – Disabled
• 1 – 1000:1 ratio
•
2 – 100:1 ratio
• 3 – 10:1 ratio
To select an Output Ratio for a Mass Display Pulse Unit in Menu Code
50, follow this procedure.
1. After Step 1 – Pulse unit has been selected. The main display shows
the Pulse Output Ratio. The PPV display shows the dispenser is in
Menu Code 50.
If the dispenser has not been programmed since it came from the factory, disabled appears in the main display.
This is the default setting.
2. To change the setting, use the 0 through 3 buttons on the keypad to enter a new option. Note : If an error is
made, press the correct number. The new number replaces the error.
3. When the correct option number appears in the mass display, press the Enter button to save the selection.
4. Proceed to Step 3 – Select the pulse output speed (pulses per second).
Sale $
P O R A t i O
Kilograms
1 0 0 0 t 1
C O d e 5 0