Programming
Bennett HF H35 Instruction Manual
57
MENU CODE 49
–
HOW TO PERFORM A RAM CLEAR
Menu Code 49 is used to perform a RAM Clear. This procedure should only be done after all other logical troubleshooting steps
have been exhausted. It is used if the dispenser software stops operating or if the main memory gets corrupted or filled with
garbage.
Note: The RAM Clear procedure is not a warranted procedure ‘unless’ Technical Support is contacted and
recommends it.
CAUTION: THIS PROCEDURE WILL CLEAR THE MEMORY.
CAUTION: SOME DISPENSER PROGRAMMING MAY BE LOST AFTER THE RAM CLEAR AND SYSTEM
REPROGRAMMING WILL BE REQUIRED.
CAUTION: THIS PROCEDURE WILL ZERO OUT ELECTRONIC PUMP TOTALS.
CAUTION: DO NOT SHOW THE CUSTOMER HOW TO DO THIS PROCEDURE. THIS PROCEDURE SHOULD ONLY BE
PERFORMED BY FACTORY-TRAINED PERSONNEL.
PROGRAMMING PROCEDURE:
1.
Press the number
4
and
9
, then the [
MODE
]
button on the keypad.
2.
To perform the RAM Clear hit the [
1
] button then press [
ENTER
]. The display will say,
COLd StArt
for approximately 45
seconds.
3.
After 45 seconds, the display will act as if the manager’s keypad was plugged in for the first time. The password in Mode 03
will need to be re-entered before proceeding.
Figure 4.54
–
Clear Data
Figure 4.55
–
Cold Start
Figure 4.56
–
Side One
Sale $
C L E A r
Kilograms
D a t a 0
C O d e
4 9
Sale $
C O L d
Kilograms
s t A r t
0 0 0 0
0 0 0 0
Sale $
E N t E r
Kilograms
S i d e 1
0 0 0 0
0 0 0 0
Содержание HIGH FLOW H35
