Bennett HIGH FLOW H35, Инструкция по эксплуатации

Страница: 40 / 98

Programming
Bennett HF H35 Instruction Manual 36
READING TOTAL NUMBER OF SALES & P RICE CHANGES
1. Press the Up-Arrow (↑) button. The PPV display indicates Product 1
counter totals. The ‘Total Sale’ display shows the number of sales for
Product 1. The sales counter is incremented each time a sale is ran on
that nozzle. The ‘ Mass ’ display shows the number of price changes for
Product 1. The price change counter is incremented each time a price is
changed for that nozzle.
2. To read the counter totals for the remaining hoses, press the [ ENTER ]
button to cycle through the counter (money, mass, counter) totals for
the remaining hoses or select
1 for money total, 2 for mass totals, or 3
for counters number buttons.
3. Press the [ CANCEL ] button to exit this menu.
Figure 4.4 – Sales Total and Price Change
READING ELECTRONIC TOTALS WITH MAGNETIC REED SWITCH
The operator and/or attendant can use this method to read daily or weekly electronic totals without opening the electronic head
of the dispenser.
1. To enter the totals mode, hold the black Access Magnet over the left
side of the mass display print beside the main display as shown in
Figure 4.5 . When the first Money totals appear, remove the magnet.
The display appears as in Figure 4.6 with P11.1 showing in the PPM
window to indicate the first Money total for Product 1.
NOTE: If the magnet is not tapped over the mass display print
for 30 seconds, the display returns to the idle screen and the
sequence must be started over.
2. Tap the magnet over the mass display print again to read the Mass
Totals for Product 1.
P12.1 is displayed in the PPM display to indicate
the first Mass Total for Product 1 as shown in
3. Tap the magnet over the mass display print again to read the Counters
Totals, which is the Number of Sales and Number of Price Changes for
Product 1.
P13.1 is displayed in the PPM display to indicate the first
Counter Totals for Product 1 as shown in Figure 4.4 .
NOTE: If Menu Code 2 totals are being read or the re-settable
meter totals, continue with Step 5. If not, wait 30-seconds for
the displays to return to the idle mode, or lift a pump handle
to the ON position to return to the idle mode.
Tap the magnet over the mass display print again and the Money Totals for
Product 2 appear. Repeat steps 2 and 3 for the Product 2 totals and the
remaining hoses on this side of the dispenser.
5. If all Menu Code 1 totals have been displayed, tap the magnet over the
mass display print again to view the Menu Code 2 (Meter Totals) for
Product 1.
Note: By successively tapping the magnet over the mass
display, print the dispenser moves through the Meter Totals for each
hose.
6. If all Menu Code 2 totals have been displayed, tap the magnet over the
mass display print again to view Menu Code 26 (Resettable Meter
Totals) for Product 1
, see Figure 4.6.
NOTE: These totals can be matched up in Menu Code 5 for
the Electro-Mechanical Totals.
7. Press the [ CANCEL ] button to exit this menu.
Figure 4.5 – Magnetic Reed Switch
Figure 4.6 – Resettable Meter Totals