Barco PresentationPRO-II, Руководство пользователя

Страница: 37 / 166

PresentationPRO-II • User’s Guide 25
3. Hardware Installation
Installation
fåëí~ää~íáçå
The figure below illustrates a block diagram of a basic PresentationPRO-II system. This
diagram can be used as reference in the following installation procedure.
Figure 3-1. Block Diagram, Basic PresentationPRO-II System
You will need:
„
Use the following steps to install PresentationPRO-II:
1. Follow the unpacking procedures as listed in the “ Unpacking and Inspection ”
section on page 22.
2. As required, refer to the “ Physical and Electrical Specifications ” section on
page 124 in Appendix A for electrical and mechanical details.
3. As required, refer to the “ PresentationPRO-II Rear Panel ” section on page 12 in
Chapter 2 for the locations of all connectors.
Ethernet Hub / Switch
Program Out (Analog)
Program Out (Digital)
Inputs
Projector
Program
To External
Controller
Ethernet
(Optional)
Analog Sources to Analog Inputs 1-8
SD-SDI Source to SDI Input (SDI Model)
SD-SDI/HD-SDI Source to SDI Input (HD Model)
DVI Source to BG/DSK Input
Table 3-3. Equipment List, Basic PresentationPRO-II System
Qty. Item Note
1 PresentationPRO-II Chassis
1 Video Projector and cable Customer supplied
1 Analog Monitor and cable Customer supplied
1 Ethernet Hub or Switch Customer supplied (Optional, with External Controller)
2 Ethernet cables Customer supplied (Optional, with External Controller)
1 DVI-DVI cable Customer supplied (for BG/DSK input)
1 Video cable Customer supplied (for SD-SDI or HD-SDI input)
TBD Dedicated sources Analog video as required (customer supplied)