Barco PresentationPRO-II, Руководство пользователя

Страница: 109 / 166

PresentationPRO-II • User’s Guide 97
5. System Setup
Setting up the DSK
rëáåÖ=~=píáää=cê~ãÉ=~ë=íÜÉ=aph
This procedure enables you to capture a still frame image and assign it as the “type” for the
DSK . Please note:
•
As a recommendation, capture still frames into “temporary” memory as a setup
procedure.
•
Once still frames are captured, during live production you can switch the DSK
between the DVI input and a Still Frame.
„
Use the following steps to assign a captured still frame as the DSK “type.”
1. Ensure that BG/DSK input is properly set up as a DVI source. This input is the
source of the still frames which you will capture. Refer to the “ Using the DVI
Input as the Background ” section on page 94 for setup details.
2. In Chapter 6, refer to the “ Capturing Still Frames ” section on page 117 for
instructions on capturing still frames. Up to three frames can be captured into
temporary memory:
FG_1 , FG_2 and FG_3 .
3. In the Layer Functions Section , press BG/DSK . The button blinks and the BG/
DSK Input Setup Menu appears.
4. Scroll to the Mode line and select DSK .
5. Scroll to the Type line and select the desired still frame: FG_1 , FG_2 or FG_3 .
Important It is highly recommended that you save still frames into
“permanent” flash memory as a setup procedure — as this is
a very time-consuming step that locks the front panel of
PresentationPRO-II.