Barco PresentationPRO-II, Руководство пользователя

Страница: 114 / 166

102 PresentationPRO-II • User’s Guide
6. Operations
Working with Layers
tçêâáåÖ=ïáíÜ=i~óÉêë
The following topics are discussed in this section:
•
Working with PIPs
•
Modifying PIPs
•
Working with Keys
•
Modifying Keys and DSKs
•
Background and DSK Transitions
•
LOGO Transitions
tçêâáåÖ=ïáíÜ=mfmë
With PresentationPRO-II, you can perform the following types of PIP transitions:
•
Transitioning a PIP to Program
•
Removing a PIP from Program
•
Cancelling a PIP Transition
•
Changing a PIP to a KEY
qê~åëáíáçåáåÖ=~=mfm=íç=mêçÖê~ã
„
Use the following steps to transition a PIP to Program:
1. Ensure that you have preset the desired transition type and rate. Refer to the
"
Working with Transitions " section on page 115 for details.
2. In the Layer Functions Section , ensure that the PIP button is blinking. If not,
press PIP to display the PIP Adjustment Menu . Please note:
~
If there is no source on Program, the last source associated with the PIP
will blink on the Source Selection Bus .
~
If there is a source currently on Program, it will be lit solid on the Source
Selection Bus .
3. On the Source Selection Bus , select a new source. The button blinks to indicate
that the source is "pending."
~
If there is no source on Program, only the pending source will blink.
~
If there is a source currently on Program, the pending source will blink
and the current source will be lit solid.
4. In the Layer Functions Section , press TRANS . The current PIP transitions off,
the new PIP transitions on, and the TRANS button lights during the interval.
PIP
Tip From this point forward, transitioning a PIP is a simple two-
button sequence: (1) select source, (2) press
TRANS .