Barco PresentationPRO-II, Руководство пользователя

Страница: 118 / 166

106 PresentationPRO-II • User’s Guide
6. Operations
Working with Layers
oÉãçîáåÖ=~=hÉó=Ñêçã=mêçÖê~ã
„
Use the following steps to remove a Key from Program:
1. Ensure that you have preset the desired transition type and rate. Refer to the
"
Working with Transitions " section on page 115 for details.
2.
In the
Layer Functions Section
, ensure that the
KEY
button is blinking. If not,
press Key to display the Key Adjustment Menu . On the Source Selection Bus ,
the source associated with the Key will be lit solid.
3. In the Layer Functions Section , press CLEAR to "pend" the removal of the Key.
The CLEAR button will blink to indicate that the operation is pending.
4. In the Layer Functions Section , press TRANS . The TRANS button lights during
the interval, and at the conclusion of the transition, the
Home Menu
appears.
`~åÅÉääáåÖ=~=hÉó=qê~åëáíáçå
„
Use the following steps to cancel a Key transition.
S
Assumption : A Key transition has been selected, and the KEY button is
blinking.
1.
In the
Layer Functions Section
, press
KEY
. The button stops blinking, and the
pending transition is cancelled. Please note:
~
If there is no source currently on Program, the KEY button turns off.
~
If there is a source currently on Program, the KEY button stops blinking
but remains lit.
`Ü~åÖáåÖ=~=hbv=íç=~=mfm
„
Use the following steps to change a Key to a PIP.
S
Assumption : A Key is currently on Program.
1. Ensure that you have preset the desired transition type and rate. Refer to the
"
Working with Transitions
" section on page 115 for details.
2. In the Layer Functions Section , press PIP . Please note:
~
The
PIP
button blinks and the
KEY
button remains lit solid.
~
The
PIP Adjustment Menu
appears, and the source associated with the
Key lights solid on the Source Selection Bus .
3. If desired, select a new PIP source on the Source Selection Bus . The pending
source blinks and the current Key source remains lit solid.
4. In the Layer Functions Section , press TRANS . The current Key transitions off
and the new PIP transitions on. The TRANS button lights during the interval.
5. Adjust the new PIP’s size, position, border, shadow, source image, cropping and
"special effects" as desired. Refer to the “
Modifying PIPs “ section on page 104
for details.
CLEAR
Note If you do not select a new source, the current source will be
used. It will transition off as a Key, and back on as a PIP.