Barco PresentationPRO-II, Руководство пользователя

Страница: 32 / 166

20 PresentationPRO-II • User’s Guide
2. Hardware Orientation
Front Panel Sections
LOGO — press to pend a LOGO transition or select the LOGO source. The button blinks
when selected and the Logo Input Setup Menu appears on the Touch Screen . In
Chapter 4, refer to the “ LOGO Input Setup Menu ” section on page 82 for details.
Please note:
•
The logo is the system’s highest priority layer, to which you can assign one of
PresentationPRO-II’s three internal frame stores.
•
The LOGO layer is often used as a “black preview” function. If Black is selected
as the “type” on the Logo Input Setup menu, you can fade to black at any time by
pending a LOGO transition.
•
The logo is not a live input, and does not have an associated key signal.
FULL SCREEN — press to take the selected (blinking) PIP or Key to full screen. In each
case, the source’s height will be used as the parameter that defines the full screen size.
S
Example : If a source’s original dimension is 1280 x 1024, pressing FULL
SCREEN expands (or reduces) that PIP to fill the output screen vertically. If
borders are ON , they will be taken into account so that they are visible.
In Chapter 6, refer to the “ Using Full Screen ” section on page 114 for instructions.
CLEAR — press to “pend” the removal of the currently selected (blinking) layer from
Program — in the next transition. For example, you can “clear” a PIP, Key, still frame
background, DSK or LOGO. In Chapter 6, refer to the “
Working with Layers ” section on
page 102 for instructions.
FREEZE — press to freeze the selected (blinking) PIP or Key on Program. In Chapter 6,
refer to the “ Using Freeze ” section on page 114 for instructions.
RESET — press to reset the current effect (e.g., PIP, Key, crop, etc.) to a nominal default
value. You can think of this function as being “context sensitive” — as it resets only the
current effect, without affecting other modifications.
S
Example : If you adjust a PIP’s size, border and shadow, and wish to reset
only the border, navigate to the Border Menu and press Reset .
In Chapter 6, refer to the “ Using Reset ” section on page 114 for details.
TRANS — press to transition the pending layer(s) to or from Program — using either a mix
or wipe. The wipe patterns, edge types and transition rates are selected using the Effects
Menu .
•
In Chapter 4, refer to the “ Effects Menu ” section on page 53 for menu details.
•
In Chapter 6, refer to the “ Working with Transitions ” section on page 115 for
operational procedures.
LOGO
Important All layers are maintained underneath the LOGO . For
example, if you have a PIP and a DSK on Program when you
transition to the
LOGO , when you mix the LOGO off — the
previous "look" is still there.
FULL
SCREEN
CLEAR
FREEZE
RESET
TRANS