6. Advanced configuration
Barco – Eos Workstation for Windows – DOC-3062-2 – Revision 12 – August-2004
____________________________________________________________________________
6-9
6.1.5
Installing display drivers for new cards
If the display driver was already installed on E
OS
, then after inserting new graphic cards or RGB or video input
cards a hardware check will detect the new cards when switching on E
OS
. The installation of the display drivers
for the new components is started automatically.
Figure 6-9
New Hardware found and driver installed
After the installation is finished you have to confirm
Finish
:
Figure 6-10
installation is finished
Depending on the inserted hardware you are prompted to reboot E
OS
. In this case it is recommended to click
No
and to reboot just one time manually after the procedure explained above has been run through for all cards.
Figure 6-11
system settings change
After the installation of the display drivers you have to configure the additional graphic
cards, see section
3.5.2 Configuring the display driver
Содержание Eos
Страница 1: ...User s manual Eos Workstation for Windows...