Barco Eos, Руководство пользователя

Страница: 38 / 170

3. Getting started
Barco – Eos Workstation for Windows – DOC-3062-2 – Revision 12 – August-2004
__________________________________________________________________________
3-21
3.2.9 Dual RGB Input Card
The D
UAL
RGB I
NPUT
C
ARD
provides the capability of displaying RGB monitor signals. Either two analog signals up to
1280×1024@75Hz or one analog signal up to 2048×1536@65Hz are digitized for further processing in E
OS
.
Standard
The synchronization modes Hsync+Vsync , Csync and Sync-on-Green are supported.
Connectors
The D
UAL
RGB I
NPUT
C
ARD
has two VGA compatible 15-pin SubMinD connectors. Each is for connecting one RGB
signal to the E
OS
. If a signal with more than 1280×1024@75Hz is inserted it must be connected to RGB In 1 ,
while RGB In 2 is not available.
RGB In 2
RGB In 1
Figure 3-28
connector of D
UAL
RGB I
NPUT
C
ARD
Order
Within a single D
UAL
RGB I
NPUT
C
ARD
the numbering of the video channels is as shown in the figure above. The
order of the D
UAL
RGB I
NPUT
C
ARDS
in E
OS
is determined in exactly the same way as with the Q
UAD
A
NALOG
V
IDEO
C
ARD
. Refer to section 3.2.7 Quad Analog Video Card , please.
Specifications
For detailed technical specifications of the D
UAL
RGB I
NPUT
C
ARD
please refer to section 7.1 Technical data .