Barco Eos, Руководство пользователя

Страница: 112 / 170

6. Advanced configuration
Barco – Eos Workstation for Windows – DOC-3062-2 – Revision 12 – August-2004
__________________________________________________________________________
6-11
6.1.7 Combination rules
When extending a system by inserting additional expansion cards into an E
OS
or E
OS
E
XTENDER
or by exchanging a
card with a card of different type, the following rules must be checked to see, if the planned configuration is
possible.
Functional rules
•
In an E
OS
the number of inserted cards must not exceed 6, in an E
OS
E
XTENDER
13 expansion cards.
•
AGX and UGX G
RAPHIC
C
ARDS
may not be used in one system.
•
O
MNI
S
CALER
SXGA (
AGX-3002
) and O
MNI
S
CALER
UXGA (
AGX-3313
) can be mixed.
•
Systems with UGX G
RAPHIC
C
ARD
and UXGA output must use O
MNI
S
CALERS
UXGA.
•
Q
UAD
A
NALOG
V
IDEO
C
ARD
, S
TREAMING
V
IDEO
C
ARD
and D
UAL
RGB I
NPUT
C
ARD
may only be used together with
O
MNI
S
CALERS
For best display quality of the video and RGB sources, in addition the following should be considered
•
Video and RGB windows may not require too much bandwidth, please see section 4.1 Input cards .
Overload calculation
•
Not more than 6 AGX G
RAPHIC
C
ARDS
or 3 UGX G
RAPHIC
C
ARDS
may be inserted into the whole E
OS
system.
•
There are four criteria V1 , V2 , V3 and M1 . Each of them must be valid, to allow the card to be inserted.
The rule for the criteria V1 , V2 and V3 is the following. For each card there is a factor that must be multiplied by
the amount how often it is inserted in the device (E
OS
or E
OS
E
XTENDER
). The sum may not exceed 100, if the con-
figuration shall be allowed. The calculation for criterion M1 is similar, but finally the sum of all E
OS
and E
OS
E
X-
TENDER
devices of the system my not exceed 100.
Eos
standard
Eos Extender
standard
Eos / Eos Extender
redundant operation
V1 V2 V3 V1 V2 V3 V1 V2 V3
AGX G
RAPHIC
C
ARD
6.20 3.09 5.75 5.78 1.85 4.14 6.94 2.65 5.24
UGX G
RAPHIC
C
ARD
5.37 12.33 13.03 5.01 7.40 9.38 6.01 10.57 11.88
O
MNI
S
CALER
max. SXGA 2.89 6.55 6.94 2.70 3.93 5.00 3.24 5.62 6.33
O
MNI
S
CALER
max. UXGA 3.31 7.71 8.12 3.09 4.63 5.85 3.70 6.61 7.40
Q
UAD
A
NALOG
V
IDEO
C
ARD
14.45 5.78 12.23 13.49 3.47 8.81 16.18 4.96 11.15
D
UAL
RGB I
NPUT
C
ARD
12.80 5.78 11.39 11.95 3.47 8.20 14.33 4.96 10.38
S
TREAMING
V
IDEO
C
ARD
18.16 8.48 16.39 16.95 5.09 11.80 20.34 7.27 14.94
optical cables – 0.81 0.68 – 0.49 0.49 – 0.70 0.62
Maximum allowed: 100 100 100 100 100 100 100 100 100
Table 6-5
components factors for configuration criteria calculation V1 , V2 and V2
It is not allowed to configure combinations of cards that do not fullfil the three above
criteria. Otherwise there is the risk to destroy the power supply!