Barco Eos, Руководство пользователя

Страница: 43 / 170

3. Getting started
Barco – Eos Workstation for Windows – DOC-3062-2 – Revision 12 – August-2004
__________________________________________________________________________
3-26
3.2.12 Network
LAN
For connecting E
OS
to the LAN (local area network) there are three different network cards or an onboard LAN
adapter available:
•
Onboard LAN Adapter 10/100 Mbps or 10/100/1000 Mbps
optional, depending on the model of E
OS
. See section 3.1.1 Eos .
•
Ethernet Card 10 Mbps, ISA
It is only applicable with a model of E
OS
with available ISA slot. See section 3.1.1 Eos .
•
Ethernet Card 10/100 Mbps, PCI
•
Ethernet Card 10/100/1000 Mbps, PCI
For a redundant connection to the LAN the Ethernet Card 10/100 Mbps as well as the Ethernet Card
10 /10 0 /10 0 0 Mbps are both also available as server adapters, allowing to configure them in teaming mode,
sharing one single IP-address. You can see whether a network card is of server or desktop type on the label on
the card. Please refer also to section
6.2.8 Redundant network adapter .
Network card 10 Mbps
The 10 Mbps network card offers alternatively Twisted Pair, AUI or Cheapernet connection:
Figure 3-36
Connecting to Twisted pair Cable (RJ-45) left
and AUI (DIX) right
When connecting to AUI:
•
Locate the AUI port and move the slide latch down to the open position.
•
Connect the external transceiver to the AUI port.
•
Move the slide latch up to the closed position to lock the cable in place.
Figure 3-37
Connecting to Cheapernet (BNC)