Barco Eos, Руководство пользователя

Страница: 20 / 170

3. Getting started
Barco – Eos Workstation for Windows – DOC-3062-2 – Revision 12 – August-2004
____________________________________________________________________________
3-3
Next to the air supply openings [1] there is the handle of the filter mounting [2].
In the center of the standard case there are three buttons. The upper one is the restart button [3], the one in the
middle is the lock keyboard switch [4], that serves to enable or disable keyboard input and the lower one is the
power button [13]. The two LEDs next to the switches indicate hard disk drive operating [7] respectively
power on [8].
The case for redundant operation additionally has a buzzer reset button for power module failure [5], which is
located on the top leftmost position. The restart button [3] is located between the lock keyboard switch [4]
and the power button [13] instead. On the front there is also an additional LED, indicating power module
failure [6], please refer also to section 5.1.1 Redundant power module .
On the right hand side there is the floppy disk drive [9], followed by the CD ROM or DVD ROM drive [11] and
below it the hard disk drive [10a] or [10b].