Barco Eos, Руководство пользователя

Страница: 84 / 170

4. Operating
Barco – Eos Workstation for Windows – DOC-3062-2 – Revision 12 – August-2004
__________________________________________________________________________
4-21
Configuring Streaming Video Card
For each S
TREAMING
V
IDEO
C
ARD
once the configuration parameters must be entered into the Board Settings dialog,
therefore select Board Settings from the Options menu.
Figure 4-8
Board Settings dialog of the S
TREAMING
V
IDEO
C
ARD
IP Configuration
Address
IP address of the S
TREAMING
V
IDEO
C
ARD
.
Each S
TREAMING
V
IDEO
C
ARD
needs its own, fixed IP address
Netmask
Netmask of the S
TREAMING
V
IDEO
C
ARD
, must be the same value for all cards
Gateway
Gateway, must be the same value for all cards. Even if the network does not require
an indication of the Gateway, a value must be filled in.
Decoder Configuration
Algorithm
All video streams processed by one S
TREAMING
V
IDEO
C
ARD
must have the same com-
pression algorithem. Currently mpeg2 is supported
Table 4-11
Configuring video streams
The parameters of a video stream must be defined in this Stream Params Editor , before the S
TREAMING
V
IDEO
C
ARD
can display it. Once defined it is available for every S
TREAMING
V
IDEO
C
ARD
in the system.
Pressing the Add button adds a new stream with the entered name into the Streams list. The parameters that
are displayed at that time are saved together with it. If there exists already an entry with the same name then
its parameters are not changed. Pressing the
Apply button applies the displayed parameters to the hardware. In
that way changes can be controlled directly. Pressing the OK button applies the parameters to the hardware and
to the registry. Pressing the Cancel button closes the window, anyhow changes that are already confirmed with
the Add or Delete button can not be revoked.