Baldor VS1GV21-1B, Инструкция по установке и эксплуатации

Страница: 184 / 204

B-12 Parameter Tables MN765
Block Title Parameter P# Adjustable Range Factory User Setting
BRAKE
ADJUST
(Continued)
BRAKE ON REVERSE [2] 2507 0-Off
1-On
0
STOP BRAKE TIME
[2]
2508 0.0 - 60.0 seconds 0.0
BRAKE ON START [2] 2509 0-Off
1-On
0
START BRAKE TIME [2] 2510 0.0 - 60.0 seconds 0.0
PROCESS
CONTROL
PROCESS TYPE 2601 0-None
1-Forward Acting
2-Reverse Acting
0
SETPOINT ADJ LIM 2602 0.0 - 100.0% 10.0
PROC FEEDBACK 2603 0-None
1-Setpoint Cmd
2-Local Speed Ref
3-Analog In1
4-Analog In2
5-Network
6-Composite Ref
7-Opt1 Ana In1
8-Opt1 Ana In2
9-Opt2 Ana In1
10-Opt2 Ana In2
0
SETPOINT SOURCE 2604 0
SETPOINT COMMAND 2605 -100.0% to +100.0% 0.0
PROC ERR TOL 2606 0.0 - 100.0% 10.0
PROC PROP GAIN 2607 0.0000 - 9999.9990 1.0000
PROC INTG GAIN 2608 0.0000 - 9999.9990 0.0000
PROC INTG CLAMP 2609 0.0 - 100.0% 100.0
PROC DIFF GAIN 2610 0.0000 - 9999.9990 0.0000
PROFILE ADJUST 2611 0-Off
1-On
0
PROFILE ADJ BAND 2612 0.0 - 200.0% 50.0
PROC SLEEP BAND 2613 0.0 - 100.0% 0.0
PROC OUT FILTER 2614 0.0 - 100.0 seconds 0.00
PROC OUT OFFSET 2615 -100.0 to +100.0% 0.0
PROC OUT GAIN 2616 0.0 - 200.0% 100.0
SKIP FRE-
QUENCY
SKIP FREQ 1 2701 0 - MAX Speed 0.00
SKIP BAND 1 2702 0 - MAX Speed 0.00
SKIP FREQ 2 2703 0 - MAX Speed 0.00
SKIP BAND 2 2704 0 - MAX Speed 0.00
SKIP FREQ 3 2705 0 - MAX Speed 0.00
SKIP BAND 3 2706 0 - MAX Speed 0.00
SYNCHRO
START
SYNC START FWD [6] 2801 0-Off
1-On
0
SYNC START REV [6] 2802 0-Off
1-On
0
SYNC AT MAX FREQ
[6]
2803 0-Off
1-On
1
[2] Only available or active in V/F mode. Ignore thse parameters for Closed/Open Vector mode.
[6] Only available or active in V/F or Open Vector modes. Ignore for Closed Vector mode. Factory settings are different
depending on mode (V/F or Open Vector).
Note: In Open Vector mode, it is recommended that these values remain at the factory settings.
Table B-2 Parameter Block Values Level 2 (Cont.)