Baldor VS1GV21-1B, Инструкция по установке и эксплуатации

Страница: 155 / 204

Monitor and RTC Description 12-9 MN765
RTC Scheduling Examples
The following table gives examples of the kinds scheduled events that may be programmed.
Table 12-6 Scheduled Events Examples
Action 1 Action 2 Message 1 Message 2
P3601 Digital Out 1 ON
P3602 Digital Out 1 OFF
P3603 Change Filters
P3604 Service Heating System
P3605 Daily
P3606 Daily
P3607 Monthly
P3608 Yearly
P3609 3-Feb-07 01:00:00
P3610 3-Feb-07 02:00:00
P3611 10-Jan-06 13:30:00
P3612 10-Jul-06 13:30:00
For this example assume the drive is in Standard Run Two Wire operating mode with digital output 1 wired to FWD. The
drive would then run daily for one hour from 1:00 AM to 2:00 AM starting February 3, 2007. The same drive is scheduled for
monthly and yearly service. Filters are to be changed on the tenth of every month after lunch starting January 10, 2006. In
addition, once a year on the 10 of July the heating system is serviced after lunch as well.
RTC messages 1&2 are not logged but must be acknowledged before they are cleared.
RTC Keypad Screens
The following templates shows how these parameters are displayed on the keypad.
Keypad Screen
Line 1 Program Parameter Block Name
Line 2 Parameter Name
Line 3 Parameter List Text
1
Qualifier
1
Line 4 Month
1
Day
1
, Year
1
Hour
1
: Minutes
1
: Seconds
1
Line 5 A Parameter Number B
Note 1: Field is editable.
Line 1 holds the screen’s name and parameter block name. Line 2 holds a parameter name. Line 3 holds list parameter text
and the scheduling qualifier. Line 4 holds the date and time. And line 5 holds the A-Function Key name, a parameter number
and the B-Function Key name.