Balcrank Fusion 3110-027, Сервисный бюллетень

Страница: 10 / 60

10
Enter time
--:--
Time and Date Screens
To change or set the system time:
1� Select the INI menu and press Enter�
2. Use the numeric keys to set a 24-hour military time of day.
3� Press Enter to save the setting and advance�
To change or set the system date
:
1� Use the numeric keys to enter the two-digit day
The cursor automatically moves to the month�
2� Press the
Scroll
key to select a month�
3. Use the numeric keys to enter the four-digit year.
4� Press
Enter
to save the setting�
Enter date
19/aug/2012
The Master Keypad acts as the communications director for the RF communications. It handles all communi -
cations between the Dispense Keypads and the PC. There are no operator menus associated with the Master
Keypad—only supervisor menus for setting up the system or creating reports.
The remainder of this document shows only the actual display, not the entire keypad.
To gain access to the supervisor menus, the supervisor PIN has to be entered. The default PIN is 0001 at
initial power-up�
System Version
16aug2012 08:35
V3.00
The standard screen shows the system date and software
version number. The display will alternate between the stan -
dard screen and the
Enter Pin Number
screen� The
Enter
Pin Number
screen is used to access the supervisor menus�
Enter Pin No.
- - - -
NOTE: An “N” displayed in the lower left-hand corner of
the system version screen indicates a Radio Network error�
See “ Radio Status ” on page 23 to check the source of the
error�
Settings Overview / Supervisor Menus
The following changes can only be made at the Master Keypad in the setup mode. All other settings can be
changed by using the FMS software.
The
INI
menu is used to set the system’s date and time.
16aug2012 08:35
V3.00
N
Enter PIN Number
To access the setup mode:
Enter the supervisor PIN number and press
Enter �
The default PIN is 0001 at initial power-up.
Select
INI CNF MET REP
INITIALIZATION (INI) MENU
Enter date
--/jan/----
Master Keypad