Balcrank Fusion 3110-027, Сервисный бюллетень

Страница: 45 / 60

45
Adding a Master Zone
Edit a Master Zone
1. From the Keypad and Hoses screen, click New Master Zone �
2. Select the Master Zone ID from the drop-down menu. The options are 1…8.
3. Select the serial port that the master is plugged into from the COM Port from the
drop-down menu�
4� Click Save to save changes, or Close to exit and discard the changes.
1� Select the Master Zone you would like to edit in the Keypads and Hoses screen�
2� Click Edit �
3. In the Edit Master Zone screen, select the new Master Zone ID and COM Port
from the drop-down menus.
4� Click Save to save changes, or Close to exit and discard the changes.
1. From the Keypad and Hoses screen, click New Keypad.
2. The prefix is pre-filled with the number to the right of the box, if the numbers do
not match, double click the text box to reset the number to the default
3. Enter the Dispense Keypad address found on the back of the keypad. Use only
the last 8 characters as shown here:
Keypad Address
NOTE: The keypad address can also be viewed via the keypad RAD menu (see
page 23 Radio Address/Radio Prefix )
4. Select the Master Zone ID that the new keypad will be added to from the
drop-down menu�
5. Click Save . The new keypad appears on the Keypad and Hoses screen, and the
New Keypad screen resets for another new keypad.
6. When you have finished adding keypads, click Close �
NOTE: Dispense keypads that are not associated to a master zone do not appear
on the Initialization screen�
1� Select the keypad you would like to edit�
2� Click
Edit �
3. In the Edit Keypad screen, make any changes necessary following the steps
listed in “Adding a Dispense Keypad”.
4� Click Save to save changes or click Close to exit the screen without
saving changes�
Adding a Dispense Keypad
Edit a Dispense Keypad
To delete a keypad, select the keypad you would like to delete, then click Delete �
IMPORTANT !
BEFORE entering any keypad or hose
addresses, ensure the appropriate firmware
version has been selected (see page 47
System Settings)