Balcrank Fusion 3110-027 Скачать руководство пользователя страница 32

Страница: 32 / 60

INSTALLING AND LAUNCHING THE FMS SOFTWARE

The system configuration is done by using this FMS Software. Only some special functions like the operation

modes are set at the Master Keypad�

The software provides the ability to set work orders, and assign a product and a quantity to it.

All dispense results will be collected and saved in a work order list (W.O. Report). Several filters are available to

select the desired information. The result can be exported to a comma-separated value (CSV) file format.

System Requirements

Windows® 7, 8, 8.1, 10, Server 2012 or higher, 64 and 32 bit compatible
• 9-Pin RS-232 serial interface (COM) port

FMS Software Description

Before beginning the installation, please be sure your Windows user profile has the appropriate rights to install the

software properly (particularly Windows XP).

Insert the setup CD ROM into your CD ROM drive�

If the Installer does not launch itself after a short period, open it manually by double clicking on your CD Drive in

your My Computer folder. Select the AutoMenu file.

The installer menu will appear:

The installer menu provides several options:

• Server – installs the server and all server

components. This will be the location where

all the data is stored and where the client

machine will go to access and update work

orders, tank levels, etc.

• Client – installs the client and all client

components. This will have to be installed

on every machine you would like to run the

software on

• Exit closes the installer

Содержание Fusion 3110-027





























































Результаты поиска

Содержание Fusion 3110-027

Отзывы:

Похожие инструкции для Fusion 3110-027

Бренды по названию

Популярные бренды

Balcrank Fusion 3110-027, Сервисный бюллетень

Результаты поиска

Содержание Fusion 3110-027

Отзывы:

Похожие инструкции для Fusion 3110-027

Бренды по названию

Популярные бренды