Balcrank Fusion 3110-027, Сервисный бюллетень

Страница: 19 / 60

19
Barcode Scanner
YES / NO
Scanner Lock
OFF PIN ALL
Barcode Scanner
Hardware Requirements
The barcode scanner must support an RS-232 output interface for use in the RF FMS. The barcode scanner
serial output must support standard RS-232 levels of ±3V DC to ±12V DC. Logic level or TTL output signals
are not supported by the RF FMS. The barcode scanner is connected to the RF FMS Dispense Keypad via
the external printer RS-232 port with DSUB9 connector on the bottom of the CCS Keypad. The RS-232 port
on the CCS Keypad is configured for a Device Circuit-Terminating Equipment (DCE) pin out configuration. A
null modem adapter is required for barcode scanners that are also terminated with a DCE pin out configura
-
tion. The required RS-232 port settings for the barcode scanner input are as follows:
1� Use the Scroll key to move the cursor to either YES or NO �
2� Press Enter to accept the setting and advance to the next screen.
• If you select YES , the display advances to the
Scanner Lock
screen�
• If you select NO , the display advances to the
Buzzer
screen�
Baud Rate
9600 Baud
Data Bits 8 Bits
Stop Bits 1 Bits
Parity Odd
Hardware Flow Control None
The data output of the barcode scanner is required to be a stream of ASCII characters representing the bar -
code. To identify the end of transmission, the stream of ASCII characters should be terminated by a carriage
return and line feed ASCII characters.
• Barcode Scanner cannot be used with Remote Printer.
• External Printer setting must be set to
NO �
Scanner Lock
The Scanner Lock screen has three selectable settings: OFF, PIN,
and ALL. Depending on the setting chosen, different user input
screens will allow input from the keypad or barcode scanner.
The table below outlines the screens where the keypad is active or disabled based on the three different set -
tings for the Scanner Lock feature.
Screen OFF PIN ALL
PIN Entry User Both Scanner Scanner
PIN Entry Supervisor Both Both Both
WO Number Both Both Scanner
Meter ID Both Both Scanner
Quantity Both Both Scanner
AN Field Both Both Scanner
N Field
Both Both Scanner