30
RF Mode (Standard Pre-Selection Mode)
Work Order Validation via the Dispense Keypad
0.00
Qt
7.2
When the batteries are installed in the meter, the meter
will automatically enter the RF mode. The trigger is in a
locked-out position and no oil can be dispensed until a
dispense order is received by the meter.
Dispensed Qty
Batch Size
RF COM
1� Press the
RESET
button on the meter to enable it to receive a dispense order provided by the Dispense
Keypad� The trigger will unlock�
2. Pull the trigger to begin the dispensing of fluid then release the trigger. The valve will automatically lock in
place, even though the trigger will fall back to the closed position (
DO NOT CONTINUE TO HOLD THE TRIG-
GER
). The flow will automatically shut off when the programmed amount has been dispensed.
3. To top off, pull the trigger to dispense fluid and release when the desired amount has been reached.
4� Press the
RESET
button when finished. The total quantity will be transmitted to the keypad and the meter will
return to a locked-out position. The meter is now ready to receive the next dispense order from the keypad.
Содержание Fusion 3110-027
Страница 4: ...4 System Overview...
